| Peg Hook Mounting 69 mm and 49 mm Labels |
 Download this page |
As with shelf mounting, peg hook
configurations must also take tamper
protection, simplicity and label
orientation requirements into account.
SES has created and patented this new
peg hook support system adapted for
69 mm and 49 mm labels.
The small size offers a major advantage,
taking shop fitting that extra step by
respecting the facings!
|
|
Our Favorites !
Ideal for small facings
A "universal" mounting system compatible
with the majority of peg hooks on the market
An aesthetic fastener highlighting the
transparency of the materials and the
discretion of the support
Tamperproof mounting
Self-adjusting inclination, based on the
principle of constant gravity (no adjustment
required)
2 different reading angles depending on
brace position.
|
| Bumper Rail |
Download this page |
The SES Bumper rail is designed with
sturdiness in mind to protect ESLs
located primarily on lower shelves.
At this level of the shelving, damage
is frequent due to impacts (carts,
floor cleaners), and vertical pressure
as a result of shelves being used as a
step.
The SES Bumper rail combines
efficient protection with a hinged
transparent cover while maintaining
the famous patented ESL mounting
system.
The SES Bumper rail is secured to the
horizontal edge of all shelf edge
shapes with either screws or rivets.
An alignment tube, inserted into the
Bumper rail connected to another
Bumper rail, ensures perfect alignment
of the lower part of the
gondola.
|
|
Our Favorites !
Built-in protective cover
Rail sturdiness
Label tamper protection
Perfect transparency of the hinged protective cover
Once released, the cover automatically covers the ESLs
Perfect trail alignment thanks to alignment tubes
|
| Rail covers |
Download this page |
These covers can be adapted to all types of SES rails,
standard R4 rail, single pincer rail and the double pincer rail.
|
| Double Pincer Rail |
Download this page |
This rail is designed to be attached to the edges
of shelves:
- KIDER, KS type
- CEFLA
- EPTA and COSTAN clips leave a space
between the edge of the shelf and the rail
for the air curtain.
This rail can be inclined by adding spacers:
30° Ref. : RAFICOR030
45° Ref. : RAFICTR45
60° Ref. : RAFICORGR60
|
| Butterfly R4 Rail |
Download this page |
This rail is designed to be attached to the edges
of ITAB MERTENS shelves:
- 34-mm thick (4LC type)
- 28-mm thick (4L type)
This rail can be inclined by adding spacers:
30° Ref. : RAFICOR030
45° Ref. : RAFICTR45
60° Ref. : RAFICORGR60
|
| Rail R4 |
Download this page |
This new SES rail advantageously replaces the R3 rail and
incorporates feedback from our customers. Although
lighter in weight, it has retained its sturdy design for label
protection.
It features a built-in slide to better hold the decorative
band in place.
"Fully" compatible with 25 mm shelves, the rear portion
designed to secure the rail does not extend past the
bottom of the shelf.
The positioning of the inclination spacer is reversed
enabling POS-a or a customized communication support
to be inserted.
|
|
Our Favorites !
ESL protection
less prominent
The bottom of the rail
protrudes less,
giving the ticket more height
Slide for spacers
Possible POV-a support
Possible support de PLV
Height adapted to
25 mm shelves
Decorative band retaining slide
Elongated positioning guide
|
| Single Pincer Rail |
Download this page |
This rail is designed to be positioned on the edges
of a shelf with U-shaped channel, into which a
transparent fence can be inserted to protect the
products from falling off the shelf.
It features a small horizontal flap that protects
it from dirt and grime when the rail is not equipped
with the protective product fence.
When the product fence is used, the small flap
is folded back against it, inside the gutter.
This rail can be inclined by adding spacers:
30° Ref.: RAFICORO30
45° Ref.: RAFICOTR45
60° Ref.: RAFICOGR60
|
| Fixing individually Soloclip & Solocam |
Download this page |
Fixing individually adapted to your different types of tablets
|
| Solocam |
Download this page |
Locks in place by an eccentric button (cam)
inserted in a groove edge
|
| Cocoon Rails |
Download this page |
These rails can be inclined by adding spacers:
- 30° Ref. : RAFICOR030
- 45° Ref. : RAFICTR45
- 60° Ref. : RAFICORGR60
|
|
